#2 18″ PERFECTION HIP & RIDGECAP UNITS

Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 18-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.

Toll Free: 1-877-850-1767

#2 18″ PERFECTION HIP & RIDGECAP UNITES

18″ Perfection Hip and Ridge Cap Units

Hip and Ridge Cap Units

certi-ridge® shingle ridge

number 2 grade cedar shakes

Tapersawn Shake Hip and Ridge Cap Units

18″ Perfection Hip and Ridge Cap Units

#2 18″ PERFECTION HIP & RIDGECAP UNITES | Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 18-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.
#2 18

Recommended Use

The appropriate hip and ridge unit should be selected to match the adjacent shingles or shakes. However, in many areas a tapersawn hip and ridge units is used on both shingle and shake applications. Hip and ridge product type selection should be performed in accordance with the aesthetic look desired.

Note: Prices subject to change without notice, shipping quoted separately.

Exposures

The hip & ridge exposure should be equal to or less than the exposure in the field of the roof, and should not exceed the maximum exposure for the specified length and grade.

Note: Prices are subject to change without notice.

Add treatment by selecting from the drop down list below (Kiln Dry, CCA or Fire Retardant)

Back to Top