#2 24″ x 5/8″ Tapersawn Hip & Ridgecap Units

Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 24-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.

Toll Free: 1-877-850-1767

Recommended Use

The appropriate hip and ridge unit should be selected to match the adjacent shingles or shakes. However, in many areas a tapersawn hip and ridge units is used on both shingle and shake applications. Hip and ridge product type selection should be performed in accordance with the aesthetic look desired.

Note: Prices subject to change without notice, shipping quoted separately.

Exposures

The hip & ridge exposure should be equal to or less than the exposure in the field of the roof, and should not exceed the maximum exposure for the specified length and grade.

Note: Prices are subject to change without notice. Shipping quoted separately.

Add treatment by selecting from the drop down list below (Kiln Dry, CCA or Fire Retardant)

#2 24″ x 5/8″ Tapersawn Hip & Ridgecap Units

#2 Grade 24″ Western Red Cedar Hip and Ridge Cap

#2 24″ x 5/8″ Tapersawn Hip & Ridgecap Units | Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 24-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.
- 18 PERFECTION HIP RIDGECAP

Back to Top